 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| GLL4735 THRU GLL4763A SURFACE MOUNT GLASS PASSIVATED ZENER Zener Voltage - 6.2 to 91.0 Volts DO-213AB SOLDERABLE ENDS 1st BAND Steady State Power - 1.0 Watt FEATURES D2 D1= 0.105 0.095 (2.67) (2.41) Plastic package has Underwriters Laboratory Flammability Classification 94V-0 For surface mounted applications Glass passivated chip junction Low zener impedance Low regulation factor High temperature soldering guaranteed: 250C/10 seconds at terminals 0.022 (0.56) 0.018 (0.46) 0.205 (5.2) 0.185(4.7) 1st band denotes type and positive end (cathode) 0 D2 = D1 + 0.008 (0.20) - MECHANICAL DATA Case: JEDEC DO-213AB molded plastic over passivated junction Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Red band denotes Zener diode and positive end (cathode) Mounting Position: Any Weight: 0.0046 ounce, 0.116 gram Dimensions are in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25C ambient temperature unless otherwise specified. OPERATING JUNCTION AND STORAGE TEMPERATURE RANGE: TJ, TSTG: -55C to +150C NOMINAL ZENER VOLTAGE AT IZT TYPE (NOTE 1) MAXIMUM DYNAMIC IMPEDANCE TEST CURRENT IZT (mA) ZZT at IZT (Ohms) MAXIMUM DC REVERSE LEAKAGE CURRENT IZK (mA) IR (A) VR (Volts) MAXIMUM ZENER CURRENT (NOTE 2) VZ (Volts) ZZK at IZK (Ohms) IZM (mApk) MAXIMUM FORWARD VOLTAGE at 200mA VF (Volts) GLL4735 GLL4736 GLL4737 GLL4738 GLL4739 GLL4740 GLL4741 GLL4742 GLL4743 GLL4744 GLL4745 GLL4746 GLL4747 GLL4748 GLL4749 GLL4750 GLL4751 GLL4752 GLL4753 GLL4754 GLL4755 GLL4756 GLL4757 GLL4758 GLL4759 GLL4760 GLL4761 GLL4762 GLL4763 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 41.0 37.0 34.0 31.0 28.0 25.0 23.0 21.0 19.0 17.0 15.5 14.0 12.5 11.5 10.5 9.5 8.5 7.5 7.0 6.5 6.0 5.5 5.0 4.5 4.0 3.7 3.3 3.0 2.0 2.0 3.5 4.0 4.5 5.0 7.0 8.0 9.0 10.0 14.0 16.0 20.0 22.0 23.0 25.0 35.0 40.0 45.0 50.0 60.0 70.0 80.0 95.0 110.0 125.0 150.0 175.0 200.0 250.0 700 700 700 700 700 700 700 700 700 700 700 750 750 750 750 750 1000 1000 1000 1000 1500 1500 1500 2000 2000 2000 2000 3000 3000 1.0 1.0 0.5 0.5 0.5 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 50.0 10.0 10.0 10.0 10.0 10.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 3.0 4.0 5.0 6.0 7.0 7.6 8.4 9.1 9.9 11.4 12.2 13.7 15.2 16.7 18.2 20.6 22.8 25.1 27.4 29.7 32.7 35.8 38.8 42.6 47.1 51.7 56.0 62.2 69.2 730.0 660.0 605.0 550.0 500.0 454.0 414.0 380.0 344.0 305.0 285.0 250.0 225.0 205.0 190.0 170.0 150.0 135.0 125.0 115.0 110.0 95.0 90.0 80.0 70.0 65.0 60.0 55.0 50.0 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 NOTES: (1) Standard voltage tolerance is 10%, Suffix A = 5% (2) Surge current is a non-repetitive, 8.3ms pulse width square wave or equivalent sine-wave superimposed on IZT per JEDEC Method (3) Maximum steady state power dissipation is 1.0 watt at TT=75C 1/20/99 RATINGS AND CHARACTERISTIC CURVES GLL4735 THRU GLL4763A FIG. 1 - MAXIMUM CONTINUOUS POWER DISSIPATION PM(AV), AVERAGE POWER DISSIPATION, WATTS FIG. 2 - TYPICAL ZENER IMPEDANCE PEAK FORWARD SURGE CURRENT, AMPERES 1.0 60 HZ RESISTIVE OR INDUCTIVE LOAD 1,000 TJ=25C 0.75 100 VZ=91V VZ=56V 0.5 10 VZ=30V 0.25 P.C.B. MOUNTED ON 0.31 x 0.31 x 0.08" (8 x 8 x 2mm) COPPER PADS VZ=6.2V 0 25 1 0.5 1 10 100 500 50 75 100 125 150 175 IZT, ZENER TEST CURRENT, mA TERMINALS TEMPERATURE, C FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FOR GLL4763 FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 10 INSTANTANEOUS FORWARD CURRENT, AMPERES 1 TJ=100C 1 TJ=25C PULSE WIDTH=300s 1% DUTY CYCLE 0.1 0.1 TJ=25C 0.01 0 20 40 60 80 100 PERCENT OF RATED ZENER VOLTAGE, % 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 5 - TYPICAL TEMPERATURE COEFFICIENTS VZ TEMPERATURE COEFFICIENT, mV/C 110 90 70 50 30 10 0 TESTED at RATED IZT 0 10 20 30 40 50 60 70 80 90 100 VZ, ZENER VOLTAGE, VOLTS |
Price & Availability of GLL4742
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |